Welcome To Dongguan Bestar Machine Co.,Ltd. !
  • 13418201227
Dongguan Bestar Machine Co.,Ltd.

+86 13418201227 lily@bestarmachines.com

Location: HomeKnowledgedynamic checkweigher
Pomfret weight sorting machine
2023-04-05 22:45:20

Pomfret sorting machine: automatic weighing, multi-level sorting, stable, reliable, and high-precision

The pomfret sorting machine can perform online dynamic weighing detection. After the product weight is automatically weighed, it is automatically sorted to the corresponding level according to the product weight range.

Technical principle of Pomfret sorter:

Products from the previous production line enter the equipment speed-up unit;

After correcting and speeding up, the product enters the weighing unit neatly and equidistantly, and when it passes the photoelectric switch at the front end of the weighing unit, the equipment starts to weigh the product automatically;

At the same time, the equipment is compared with each pre-set weight range and automatically sorted into the corresponding weight range grade.

Aquatic Product Sorter

Basic parameters of Pomfret sorter:

Weighing accuracy: ±0.5g

Display scale: 0.01g

Sorting speed: 150 pieces/min

Belt speed: 20-90 m/min (adjustable by frequency conversion)

Length of front-end feeder: 1500mm (manual assistance is required for front-end)

The height of the conveyor belt from the ground: 700mm±50mm (need to confirm)

Weight classification: six levels (four levels, eight levels, ten levels, more levels can be customized) automatic feeding device is optional.

Weighing range: 5~500g

External air source: 0.6—1Mpa

Air pressure interface: ¢8mm

Load cell: German high-precision sensor

Host conveyor belt: conveyor belt

Operation display: 8 inches

Weighing table size: length: 400mm; width: 220mm;

Control power supply: AC 220 volts (fluctuation +10%, -15%, 50/60 Hz)

Working temperature: from 0°C to 40°C

Humidity: 90% relative humidity (no condensation)

Motor power: AC 220V (50/60 Hz)

Conveying direction: facing the operation interface from left to right

The material of the scale body is made of 304 stainless steel

Rejection method: lever type rejection, air jet, pneumatic push rod

Waterproof grade: IP65 (do not use hot water over 50℃ and above to wash or soak)



Contact us
  • Email: lily@bestarmachines.com

  • Tel: 13418201227

  • Address: Baoding Technology Park, Dongguan District, Dongguan, Guangdong, China