Installation and adjustment of the conveyor belt of the weight sorting scale

Abstract: The installation of the conveyor belt of the weight sorting scale: (1) Turn the adjusting nut to adjust the distance between the driven shaft and the driving shaft to the minimum; (2) Check the running direction of the sorting scale belt, and move the belt in the direction of the thick arrow in the manual Set into the tray. (3) Adjust the adjusting nuts on both sides of the tray to make the belt tension moderate. and

Installation of conveyor belt of weight sorting scale:

(1) Turn the adjusting nut to minimize the distance between the driven shaft and the driving shaft;

(2) Check the running direction of the belt of the sorting scale, and put the belt into the tray in the direction of the thick arrow in the manual.

(3) Adjust the adjusting nuts on both sides of the tray to make the belt tension moderate. And put the belt in the center of the pallet.

Adjustment of the conveyor belt of the weight sorting scale:

(1) Adjust the belt tension to a moderate degree, put it on the machine, and observe the running condition of the belt;

(2) If the belt is in the middle of the pallet, it is in a normal state and no adjustment is required;

(3) If the belt deviates to the left, the following adjustments can be made:

a: The left belt can be "tightened" and needs to be adjusted gradually. Adjust and observe until the belt returns to the center position. If you find that the adjusting nut is tight, do not adjust it forcefully.

b: The belt on the right can be "tuned loose" and needs to be adjusted gradually. Adjust and observe until the belt returns to the center position.

c: If the deviation is relatively large, adjust slowly and it is difficult to return, you can quickly loosen the belt on the right.

d: If there is friction between the belt and the side baffle, stop and check immediately.