Various mechanisms and functions of the automatic pillow packaging machine

Material sorting mechanism: Manually pour materials into the material sorting mechanism, and the material sorting mechanism automatically sorts the materials into a single feeding in a reasonable order;

Conveyor belt: There is a block pushing device on the conveyor belt, which pushes the finished products on the conveyor belt one by one to automatically transport the materials;

Packaging film clamping mechanism: The packaging film clamping device covers the packaging film, then clamps it, and sets the width of the packaging film;

Pressure roller: The packaging film is compressed by the pressure roller to prevent deviation or more film climbing when the film is transported;

Power roller: The power roller is a device for transporting the film, which can be driven by a frequency conversion electrical appliance to control the film travel distance of the packaging film;

Film inlet adjustment roller: This is to adjust the height, width, and width of the packaging film after the bag is formed;

Bag former: This is to make packaging film into bags;

Longitudinal sealing mechanism: The longitudinal sealing mechanism is divided into a film pulling wheel, a hot-melt longitudinal sealing device, and a curing device wheel. The film-pulling wheel is responsible for pulling the packaging film down on the longitudinal sealing device, and the hot-melting longitudinal sealing device heats the packaging film on both sides. The curing device wheel cures the packaging film well to prevent the packaging film from being pulled apart;

Finishing belt: The finishing belt is used to compress the materials in the packing bag to prevent the materials from deviation or the packing bag is too high;

Photoelectric sensor: The photoelectric sensor feeds back the light spot on the packaging film to the PLC, and then cuts the packaging bag according to the light spot;

Horizontal sealing and cutting mechanism: Automatically judge the cutting position of the packaging bag through the light spot, and then automatically output the material;

Brush: After the material is output, part of the material is not cut off. At this time, a brush is required to automatically output the material and automatically take it away.