How to maintain food metal detector?

Why do you need to maintain food metal detector? The main reason is that the food metal detector is a detection instrument with high sensitivity and fast detection speed. It has strict requirements on the use environment and the maintenance of the food metal detector itself. Therefore, after a period of use, in order to ensure normal use, the food metal detector should clean the conveyor belt and other easily contaminated parts every day.

1. Conveyor belt surface cleaning: Please pay attention to adjust the sensitivity of the food metal detector to the original level before cleaning, then straighten the towel and appropriately press it on the surface of the conveyor belt, turn on the machine, run the machine more than 5 times, and operate the food metal detection Machine, and wring out a clean towel. If the machine is running smoothly and the metal position indicator of the probe does not light up, put clothes without any metal impurities at this time, and the clothes can pass the food metal detection channel smoothly, that is, the conveyor belt has been cleaned successfully!

2. Clean the back of the conveyor belt: then wash the towel from the bottom and wring out the machine. Straighten the towel and bath towel through the conveyor belt under the towel. Hold the two ends of the towel in front of the pump conveying table, turn on the machine, and let the machine work for a week. Because the bottom conveyor belt is the dirtiest place, it needs to be wiped repeatedly. A few weeks after each operation, repeat the above steps again. Food metal detector cleaning utensils: Find a clean towel and wrung out until no water can come out.